197 lines
5.4 KiB
Arduino
197 lines
5.4 KiB
Arduino
//multiple RFID readers with SPI
|
||
/**************************************************************************/
|
||
#include <Wire.h>
|
||
#include <SPI.h>
|
||
#include <Adafruit_PN532.h>
|
||
|
||
// If using the breakout with SPI, define the pins for SPI communication.
|
||
#define PN532_SCK (2) //yellow
|
||
#define PN532_MOSI (3) //red
|
||
#define PN532_SS (4) //orange
|
||
#define PN532_MISO (5) //green
|
||
|
||
// Use this line for a breakout with a SPI connection:
|
||
Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, 4); //orange
|
||
Adafruit_PN532 nfc2(PN532_SCK, PN532_MISO, PN532_MOSI, 6); //brown
|
||
Adafruit_PN532 nfc3(PN532_SCK, PN532_MISO, PN532_MOSI, 7); //purple
|
||
|
||
//LED strip baseline
|
||
/**************************************************************************/
|
||
#include <FastLED.h>
|
||
|
||
#define LED_PIN 8
|
||
#define NUM_LEDS 60
|
||
#define LED_TYPE WS2812B
|
||
#define COLOR_ORDER GRB
|
||
|
||
CRGB leds[NUM_LEDS];
|
||
|
||
// Base colors (pure RGB, no green component)
|
||
CRGB blue = CRGB(0, 0, 180);
|
||
CRGB red = CRGB(180, 0, 0);
|
||
|
||
// Brightness levels
|
||
const uint8_t DIM_SCALE = 2;
|
||
const uint8_t BRIGHT_SCALE = 100;
|
||
|
||
void setupNFC(Adafruit_PN532 nfc){
|
||
nfc.begin();
|
||
|
||
uint32_t versiondata = nfc.getFirmwareVersion();
|
||
if (! versiondata) {
|
||
Serial.print("Didn't find PN53x board on");
|
||
while (1); // halt
|
||
}
|
||
|
||
// Got ok data, print it out!
|
||
Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX);
|
||
Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC);
|
||
Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC);
|
||
|
||
// Set the max number of retry attempts to read from a card
|
||
// This prevents us from waiting forever for a card, which is
|
||
// the default behaviour of the PN532.
|
||
nfc.setPassiveActivationRetries(0xFF);
|
||
|
||
Serial.println("Waiting for an ISO14443A card");
|
||
|
||
}
|
||
|
||
/**************************************************************************/
|
||
void setup(void) {
|
||
|
||
//LED set-up
|
||
FastLED.addLeds<LED_TYPE, LED_PIN, COLOR_ORDER>(leds, NUM_LEDS);
|
||
FastLED.setBrightness(255); // Control brightness manually
|
||
|
||
Serial.begin(115200);
|
||
while (!Serial) delay(10); // for Leonardo/Micro/Zero
|
||
Serial.println("Hello!");
|
||
setupNFC(nfc);
|
||
setupNFC(nfc2);
|
||
setupNFC(nfc3);
|
||
}
|
||
|
||
boolean getCardID(Adafruit_PN532 nfc, uint8_t *uid ){
|
||
boolean success;
|
||
uint8_t uidLength;
|
||
// Wait for an ISO14443A type cards (Mifare, etc.). When one is found
|
||
// 'uid' will be populated with the UID, and uidLength will indicate
|
||
// if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight)
|
||
|
||
//Reader 01--------------
|
||
success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, &uid[0], &uidLength, 100);
|
||
|
||
if (success) {
|
||
return true;
|
||
}
|
||
return false;
|
||
}
|
||
|
||
/**************************************************************************/
|
||
void loop(void) {
|
||
|
||
// LEDs
|
||
// --------------------------------------------------
|
||
|
||
// First 12 LEDs OFF
|
||
for (int i = 0; i < 12; i++) {
|
||
leds[i] = CRGB::Black;
|
||
}
|
||
|
||
// Bottom 6 LEDs solid BLUE
|
||
for (int i = 12; i < 18; i++) {
|
||
CRGB color = blue;
|
||
color.nscale8_video(BRIGHT_SCALE);
|
||
leds[i] = color;
|
||
}
|
||
|
||
// Gradient section (between solid colors)
|
||
for (int i = 18; i < 54; i++) {
|
||
|
||
// Map gradient range → 0–255
|
||
uint8_t pos = map(i, 18, 53, 0, 255);
|
||
|
||
// Ease to compress purple
|
||
uint8_t eased = ease8InOutQuad(pos);
|
||
|
||
// Blue → Red blend (no green)
|
||
CRGB color = blend(blue, red, eased);
|
||
|
||
// Bright first half, dim second half
|
||
uint8_t scale = (i < 36) ? BRIGHT_SCALE : DIM_SCALE;
|
||
color.nscale8_video(scale);
|
||
|
||
leds[i] = color;
|
||
}
|
||
|
||
// Top 6 LEDs solid RED
|
||
for (int i = 54; i < NUM_LEDS; i++) {
|
||
CRGB color = red;
|
||
color.nscale8_video(DIM_SCALE);
|
||
leds[i] = color;
|
||
}
|
||
|
||
FastLED.show();
|
||
delay(50); // Static
|
||
|
||
|
||
//RFID readers
|
||
boolean success1;
|
||
boolean success2;
|
||
boolean success3;
|
||
uint8_t uid1[] = { 0, 0, 0, 0, 0, 0, 0 }; // Buffer to store the returned UID
|
||
uint8_t uid2[] = { 0, 0, 0, 0, 0, 0, 0 }; // Buffer to store the returned UID
|
||
uint8_t uid3[] = { 0, 0, 0, 0, 0, 0, 0 }; // Buffer to store the returned UID
|
||
uint8_t uidLength1 = 7; // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
|
||
uint8_t uidLength2 = 7; // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
|
||
uint8_t uidLength3 = 7; // Length of the UID (4 or 7 bytes depending on ISO14443A card type)
|
||
|
||
|
||
//Reader 01--------------
|
||
success1 = getCardID(nfc, &uid1[0]);
|
||
success2 = getCardID(nfc2, &uid2[0]);
|
||
success3 = getCardID(nfc3, &uid3[0]);
|
||
|
||
if (success1) {
|
||
Serial.println("First reader found a card!");
|
||
Serial.print("UID Length: ");Serial.print(uidLength1, DEC);Serial.println(" bytes");
|
||
Serial.print("UID Value: ");
|
||
for (uint8_t i=0; i < uidLength1; i++)
|
||
{
|
||
Serial.print(" 0x");Serial.print(uid1[i], HEX);
|
||
}
|
||
Serial.println("");
|
||
}
|
||
|
||
if (success2) {
|
||
Serial.println("Second reader found a card!");
|
||
Serial.print("UID Length: ");Serial.print(uidLength2, DEC);Serial.println(" bytes");
|
||
Serial.print("UID Value: ");
|
||
for (uint8_t i=0; i < uidLength2; i++)
|
||
{
|
||
Serial.print(" 0x");Serial.print(uid2[i], HEX);
|
||
}
|
||
Serial.println("");
|
||
}
|
||
|
||
if (success3) {
|
||
Serial.println("Third reader found a card!");
|
||
Serial.print("UID Length: ");Serial.print(uidLength3, DEC);Serial.println(" bytes");
|
||
Serial.print("UID Value: ");
|
||
for (uint8_t i=0; i < uidLength3; i++)
|
||
{
|
||
Serial.print(" 0x");Serial.print(uid3[i], HEX);
|
||
}
|
||
Serial.println("");
|
||
}
|
||
}void setup() {
|
||
// put your setup code here, to run once:
|
||
|
||
}
|
||
|
||
void loop() {
|
||
// put your main code here, to run repeatedly:
|
||
|
||
}
|