//multiple RFID readers with SPI /**************************************************************************/ #include #include #include // If using the breakout with SPI, define the pins for SPI communication. #define PN532_SCK (2) //yellow #define PN532_MOSI (3) //red #define PN532_SS (4) //orange #define PN532_MISO (5) //green // Use this line for a breakout with a SPI connection: Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, 4); //orange Adafruit_PN532 nfc2(PN532_SCK, PN532_MISO, PN532_MOSI, 6); //brown Adafruit_PN532 nfc3(PN532_SCK, PN532_MISO, PN532_MOSI, 7); //purple //LED strip baseline /**************************************************************************/ #include #define LED_PIN 8 #define NUM_LEDS 60 #define LED_TYPE WS2812B #define COLOR_ORDER GRB CRGB leds[NUM_LEDS]; // Base colors (pure RGB, no green component) CRGB blue = CRGB(0, 0, 180); CRGB red = CRGB(180, 0, 0); // Brightness levels const uint8_t DIM_SCALE = 2; const uint8_t BRIGHT_SCALE = 100; void setupNFC(Adafruit_PN532 nfc){ nfc.begin(); uint32_t versiondata = nfc.getFirmwareVersion(); if (! versiondata) { Serial.print("Didn't find PN53x board on"); while (1); // halt } // Got ok data, print it out! Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX); Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC); Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC); // Set the max number of retry attempts to read from a card // This prevents us from waiting forever for a card, which is // the default behaviour of the PN532. nfc.setPassiveActivationRetries(0xFF); Serial.println("Waiting for an ISO14443A card"); } /**************************************************************************/ void setup(void) { //LED set-up FastLED.addLeds(leds, NUM_LEDS); FastLED.setBrightness(255); // Control brightness manually Serial.begin(115200); while (!Serial) delay(10); // for Leonardo/Micro/Zero Serial.println("Hello!"); setupNFC(nfc); setupNFC(nfc2); setupNFC(nfc3); } boolean getCardID(Adafruit_PN532 nfc, uint8_t *uid ){ boolean success; uint8_t uidLength; // Wait for an ISO14443A type cards (Mifare, etc.). When one is found // 'uid' will be populated with the UID, and uidLength will indicate // if the uid is 4 bytes (Mifare Classic) or 7 bytes (Mifare Ultralight) //Reader 01-------------- success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, &uid[0], &uidLength, 100); if (success) { return true; } return false; } /**************************************************************************/ void loop(void) { // LEDs // -------------------------------------------------- // First 12 LEDs OFF for (int i = 0; i < 12; i++) { leds[i] = CRGB::Black; } // Bottom 6 LEDs solid BLUE for (int i = 12; i < 18; i++) { CRGB color = blue; color.nscale8_video(BRIGHT_SCALE); leds[i] = color; } // Gradient section (between solid colors) for (int i = 18; i < 54; i++) { // Map gradient range → 0–255 uint8_t pos = map(i, 18, 53, 0, 255); // Ease to compress purple uint8_t eased = ease8InOutQuad(pos); // Blue → Red blend (no green) CRGB color = blend(blue, red, eased); // Bright first half, dim second half uint8_t scale = (i < 36) ? BRIGHT_SCALE : DIM_SCALE; color.nscale8_video(scale); leds[i] = color; } // Top 6 LEDs solid RED for (int i = 54; i < NUM_LEDS; i++) { CRGB color = red; color.nscale8_video(DIM_SCALE); leds[i] = color; } FastLED.show(); delay(50); // Static //RFID readers boolean success1; boolean success2; boolean success3; uint8_t uid1[] = { 0, 0, 0, 0, 0, 0, 0 }; // Buffer to store the returned UID uint8_t uid2[] = { 0, 0, 0, 0, 0, 0, 0 }; // Buffer to store the returned UID uint8_t uid3[] = { 0, 0, 0, 0, 0, 0, 0 }; // Buffer to store the returned UID uint8_t uidLength1 = 7; // Length of the UID (4 or 7 bytes depending on ISO14443A card type) uint8_t uidLength2 = 7; // Length of the UID (4 or 7 bytes depending on ISO14443A card type) uint8_t uidLength3 = 7; // Length of the UID (4 or 7 bytes depending on ISO14443A card type) //Reader 01-------------- success1 = getCardID(nfc, &uid1[0]); success2 = getCardID(nfc2, &uid2[0]); success3 = getCardID(nfc3, &uid3[0]); if (success1) { Serial.println("First reader found a card!"); Serial.print("UID Length: ");Serial.print(uidLength1, DEC);Serial.println(" bytes"); Serial.print("UID Value: "); for (uint8_t i=0; i < uidLength1; i++) { Serial.print(" 0x");Serial.print(uid1[i], HEX); } Serial.println(""); } if (success2) { Serial.println("Second reader found a card!"); Serial.print("UID Length: ");Serial.print(uidLength2, DEC);Serial.println(" bytes"); Serial.print("UID Value: "); for (uint8_t i=0; i < uidLength2; i++) { Serial.print(" 0x");Serial.print(uid2[i], HEX); } Serial.println(""); } if (success3) { Serial.println("Third reader found a card!"); Serial.print("UID Length: ");Serial.print(uidLength3, DEC);Serial.println(" bytes"); Serial.print("UID Value: "); for (uint8_t i=0; i < uidLength3; i++) { Serial.print(" 0x");Serial.print(uid3[i], HEX); } Serial.println(""); } }void setup() { // put your setup code here, to run once: } void loop() { // put your main code here, to run repeatedly: }