Files
2026-04-14 14:16:10 +02:00

65 lines
1.7 KiB
Arduino

#include <FastLED.h>
#define DATA_PIN 14 // A0 used as digital out
#define NUM_LEDS 240
#define BASE_LEDS 60
CRGB leds[NUM_LEDS];
// Thermometer layout — must match ExploringUncertanties.ino
const int NUM_SECTIONS = 8;
const int LEDS_PER_SECTION = 7;
const int ACTIVE_LEDS = NUM_SECTIONS * LEDS_PER_SECTION; // 56
const int START_LED = BASE_LEDS - ACTIVE_LEDS; // 4
const uint8_t DIM_BRIGHTNESS = 12;
const uint8_t BRIGHT_BRIGHTNESS = 200;
void setMirroredLED(int i, CRGB color) {
if (i < 0 || i >= BASE_LEDS) return;
leds[i] = color;
leds[119 - i] = color;
leds[120 + i] = color;
leds[239 - i] = color;
}
CRGB getThermometerColor(int i) {
// Lower half → solid blue, upper half → solid red
int midpoint = START_LED + ACTIVE_LEDS / 2; // LED 32
return (i < midpoint) ? CRGB(0, 0, 180) : CRGB(180, 0, 0);
}
void displayTemperature(int sections) {
int activeEnd = START_LED + sections * LEDS_PER_SECTION;
for (int i = 0; i < BASE_LEDS; i++) {
CRGB color;
if (i < START_LED) {
color = CRGB::Black;
} else if (i < activeEnd) {
// Active (bright): blue→red gradient
uint8_t pos = (uint8_t)map(i, START_LED, BASE_LEDS - 1, 0, 255);
color = blend(CRGB(0, 0, 180), CRGB(180, 0, 0), pos);
color.nscale8(BRIGHT_BRIGHTNESS);
} else {
// Inactive (dim): solid blue (lower half) or solid red (upper half)
color = getThermometerColor(i);
color.nscale8(DIM_BRIGHTNESS);
}
setMirroredLED(i, color);
}
FastLED.show();
}
void setup() {
FastLED.addLeds<WS2812, DATA_PIN, GRB>(leds, NUM_LEDS);
FastLED.setBrightness(84);
}
void loop() {
for (int s = 0; s <= NUM_SECTIONS; s++) {
displayTemperature(s);
delay(1000);
}
}