//multiple RFID readers with SPI /**************************************************************************/ #include #include #include // If using the breakout with SPI, define the pins for SPI communication. #define PN532_SCK (2) //yellow #define PN532_MOSI (3) //red #define PN532_SS (4) //orange #define PN532_MISO (5) //green enum UIDResult { UID_NONE, UID_RIGHT, UID_WRONG }; // Use this line for a breakout with a SPI connection: Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, 4); //orange Adafruit_PN532 nfc2(PN532_SCK, PN532_MISO, PN532_MOSI, 6); //brown Adafruit_PN532 nfc3(PN532_SCK, PN532_MISO, PN532_MOSI, 7); //purple //LED strip baseline /**************************************************************************/ #include #define LED_PIN 8 #define NUM_LEDS 60 #define LED_TYPE WS2812B #define COLOR_ORDER GRB CRGB leds[NUM_LEDS]; // Base colors (pure RGB, no green component) CRGB blue = CRGB(0, 0, 180); CRGB red = CRGB(180, 0, 0); // Brightness levels const uint8_t DIM_SCALE = 2; const uint8_t BRIGHT_SCALE = 100; void setupNFC(Adafruit_PN532 nfc){ nfc.begin(); uint32_t versiondata = nfc.getFirmwareVersion(); if (! versiondata) { Serial.print("Didn't find PN53x board on"); while (1); // halt } // Got ok data, print it out! Serial.print("Found chip PN5"); Serial.println((versiondata>>24) & 0xFF, HEX); Serial.print("Firmware ver. "); Serial.print((versiondata>>16) & 0xFF, DEC); Serial.print('.'); Serial.println((versiondata>>8) & 0xFF, DEC); // Set the max number of retry attempts to read from a card // This prevents us from waiting forever for a card, which is // the default behaviour of the PN532. nfc.setPassiveActivationRetries(0xFF); Serial.println("Waiting for an ISO14443A card"); } /**************************************************************************/ void setup(void) { //LED set-up FastLED.addLeds(leds, NUM_LEDS); FastLED.setBrightness(255); // Control brightness manually Serial.begin(115200); while (!Serial) delay(10); // for Leonardo/Micro/Zero Serial.println("Hello!"); setupNFC(nfc); setupNFC(nfc2); setupNFC(nfc3); } boolean getCardID(Adafruit_PN532 &nfc, uint8_t *uid, uint8_t &uidLength) { // Try to read a card (timeout = 100 ms) boolean success = nfc.readPassiveTargetID( PN532_MIFARE_ISO14443A, uid, &uidLength, 100 ); return success; } const unsigned long CARD_TIMEOUT_MS = 2000; unsigned long lastSeen1 = 0; unsigned long lastSeen2 = 0; unsigned long lastSeen3 = 0; void loop(void) { delay(50); const int8_t DEFAULT_TEMP = 24; int8_t temperature = DEFAULT_TEMP; unsigned long now = millis(); uint8_t uid1[7], uid2[7], uid3[7]; uint8_t uidLength1 = 0, uidLength2 = 0, uidLength3 = 0; // -------- Reader 1 -------- if (getCardID(nfc, uid1, uidLength1)) { lastSeen1 = now; } // -------- Reader 2 -------- if (getCardID(nfc2, uid2, uidLength2)) { lastSeen2 = now; } // -------- Reader 3 -------- if (getCardID(nfc3, uid3, uidLength3)) { lastSeen3 = now; } // -------- Presence check (2s timeout) -------- bool reader1Active = (now - lastSeen1) < CARD_TIMEOUT_MS; bool reader2Active = (now - lastSeen2) < CARD_TIMEOUT_MS; bool reader3Active = (now - lastSeen3) < CARD_TIMEOUT_MS; if (reader1Active) { Serial.println("Reader 1 active"); temperature -= 6; } if (reader2Active) { Serial.println("Reader 2 active"); temperature += 6; } if (reader3Active) { Serial.println("Reader 3 active"); temperature += 6; } temperature = constrain(temperature, 0, NUM_LEDS - 12); displayTemp(temperature); } void displayTemp(uint8_t temp) { // Clamp temp so we don’t overflow the strip uint8_t maxTempLeds = NUM_LEDS - 12; if (temp > maxTempLeds) temp = maxTempLeds; uint16_t brightEnd = 12 + temp; // -------------------------------------------------- // First 12 LEDs OFF for (int i = 0; i < 12; i++) { leds[i] = CRGB::Black; } // Bottom 6 LEDs solid BLUE for (int i = 12; i < 18; i++) { CRGB color = blue; uint8_t scale = (i < brightEnd) ? BRIGHT_SCALE : DIM_SCALE; color.nscale8_video(scale); leds[i] = color; } // Gradient section (between solid colors) for (int i = 18; i < 54; i++) { uint8_t pos = map(i, 18, 53, 0, 255); uint8_t eased = ease8InOutQuad(pos); CRGB color = blend(blue, red, eased); uint8_t scale = (i < brightEnd) ? BRIGHT_SCALE : DIM_SCALE; color.nscale8_video(scale); leds[i] = color; } // Top 6 LEDs solid RED for (int i = 54; i < NUM_LEDS; i++) { CRGB color = red; uint8_t scale = (i < brightEnd) ? BRIGHT_SCALE : DIM_SCALE; color.nscale8_video(scale); leds[i] = color; } FastLED.show(); } // ---- Known UIDs ---- // Right answers (4-byte UIDs) const uint8_t RIGHT_UIDS[][4] = { {0x4E, 0xBF, 0xCA, 0x06}, {0xF6, 0x4D, 0x1C, 0x06}, {0xA3, 0xBC, 0xCA, 0x06}, {0xC3, 0xDD, 0xCA, 0x06} }; const uint8_t NUM_RIGHT_UIDS = 4; // Wrong answers (7-byte UIDs) const uint8_t WRONG_UIDS[][7] = { {0x04, 0x97, 0xCF, 0x1F, 0x3F, 0x61, 0x80}, {0x04, 0x7C, 0xA9, 0x00, 0xA0, 0x61, 0x80}, {0x04, 0x6D, 0xC2, 0x2E, 0x5F, 0x61, 0x80}, {0x04, 0x22, 0x85, 0xFF, 0x9F, 0x61, 0x80} }; const uint8_t NUM_WRONG_UIDS = 4; bool compareUID(const uint8_t *uidA, const uint8_t *uidB, uint8_t length) { for (uint8_t i = 0; i < length; i++) { if (uidA[i] != uidB[i]) { return false; } } return true; } UIDResult checkUID(const uint8_t *uid, uint8_t uidLength) { // Check RIGHT UIDs (4 bytes) if (uidLength == 4) { for (uint8_t i = 0; i < NUM_RIGHT_UIDS; i++) { if (compareUID(uid, RIGHT_UIDS[i], 4)) { Serial.println("correct"); return UID_RIGHT; } } } // Check WRONG UIDs (7 bytes) if (uidLength == 7) { for (uint8_t i = 0; i < NUM_WRONG_UIDS; i++) { if (compareUID(uid, WRONG_UIDS[i], 7)) { Serial.println("wrong"); return UID_WRONG; } } } Serial.println("unknown"); return UID_NONE; }